Asus Maximus Formula SE QX6700 MIPS OC-WC
Här kommer en vattenkyld OC Asus maximus formula SE
systmet inehåller följande
[Asus MaXiMus Formula SE]
[QX6700@3600]
[GeIL 2048MB DDR2 PC2-6400 OC till 900MHz Ultra 4-4-4-12]
[BFG 8800GTX OC]
[Raid 0 2x Samsung SpinPoint P120S 250GB SATA2}]
[D-TEK FuZion CPU with Quad Nozzle]
[ThermoChill PA120.3]
[Laing DDC-1T-PLUS with Alphacool Laing DDC Pro/Ultra top]
[Cape Coolplex Pro 25]
[Stacker 832]
[4x120mm NF-P12 Noctua on SidePanel]
[2x120mm NF-12 Noctua Fun Duct Front intake]
[2x120mm NF-12 Noctua Top/Back][HDD 2x Coolink Silent Savior 80mm][PSU:ThermalTake 1200W]
[Dual display BenQ FP93GX (Digital) 2 ms]
[MX Revolution][diNovo Edge]
BIOS
Extreme Tweaker 3,680 mhz
Ai Overclock Tuner : Manual manual
OC From CPU Level Up : AUTO auto
CPU Ratio Control : Manual 8
- Ratio CMOS Setting :
FSB Frequency : 460
FSB Strap to North Bridge : 400
PCI-E Frequency: 100
DRAM Frequency: DDR2- 920
DRAM Command Rate : 2
DRAM Timing Control: Manual manual
CAS# Latency : 5
RAS# to CAS# Delay : 5
RAS# Precharge : 5
RAS# ActivateTime : 15
RAS# to RAS# Delay : auto
Row Refresh Cycle Time : auto
Write Recovery Time : auto
Read to Precharge Time : auto
Read to Write Delay (S/D) : auto
Write to Read Delay (S) : auto
Write to Read Delay (D) : auto
Read to Read Delay (S) : auto
Read to Read Delay (D) : auto
Write to Write Delay (S) : auto
Write to Write Delay (D) : auto
DRAM Static Read Control: auto
Ai Clock Twister : auto
Transaction Booster : auto
CPU Voltage : 1,50625V
CPU PLL Voltage : auto
North Bridge Voltage : 1,65V (1,71V in everest)
DRAM Voltage : 2,18V (2,32V in everest)
FSB Termination Voltage : 1,52v
South Bridge Voltage : 1,075v
Loadline Calibration : enable
CPU GTL Reference : auto
North Bridge GTL Reference : auto
DDR2 Channel A REF Voltage : auto
DDR2 Channel B REF Voltage : ddr ref
DDR2 Controller REF Voltage : auto
SB 1.5V Voltage : auto
NB LED Selection : NB Volt NB Volt
SB LED Selection : SB Volt SB Volt
CPU LED Selection : CPU VOlt Cpu Volt
Voltiminder LED : enable
CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled
Advanced CPU Configuration
CPU Ratio Control : Manual
- Ratio CMOS Setting :
C1E Suppport : Disabled
CPU TM Function : Disabled
Vanderpool Technology : Disabled
Execute Disable Bit : Disabled
Max CPUID Value Limit : Disabled
USB Configuration
USB Functions: Enabled
Legacy USB Support : Disabled
1) loop
By neo_rtr at 2008-01-141)
2) Stacker 832 med PA120.3
By neo_rtr, shot with DiMAGE X1 at 2008-01-17
3)
By neo_rtr, shot with DiMAGE X1 at 2008-01-17
4) här kan ma se hur botten på stacker är klippt
By neo_rtr at 2008-01-14
5) Pumpen
By neo_rtr, shot with DiMAGE X1 at 2008-01-17
6) loop
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
7) NB
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
8)
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
9)
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
10) BFG 8800GTX OC har byt plats på moderkortet så vga är längst upp
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
11) Sk.fanduct eller fläkttunnel
By neo_rtr, shot with DiMAGE X1 at 2008-01-20
12) sidopanel med 4st Noctua
By neo_rtr, shot with DiMAGE X1 at 2008-01-21
13) sidopanel
By neo_rtr, shot with DiMAGE X1 at 2008-01-24
14) Geil DDR2 900Mhz 1:1 2,32V
By neo_rtr at 2008-02-11
15) Temps
By neo_rtr at 2008-01-21
Kommer bygga på nytt NB, SB Mosfets med följande delar